Tipo Proyecto |
Título |
Descripción |
Institución |
Fecha de Inicio |
Fecha Fin |
Inv. Principal |
Área OCDE |
Proyectos de investigación |
Seismic Performance and Seismic Design of Damage-Controlled Prestressed Concrete Building Structures |
This project proposes and validates a unbonded post-tensioned precast concrete walls (UPT walls). In addition, this research aims to extend the understanding of the behavior, numerical modeling, and practical application of UPT walls. |
DEPARTMENT OF ARCHITECTURAL ENGINEERING, KYOTO UNIVERSITY |
Abril 2015 |
Setiembre 2018 |
MINEHIRO NISHIYAMA |
Ingeniería y Tecnología |
Proyectos de investigación |
Seismic Performance of Multi-story Prestressed Concrete Walls with Function Continuity after Large Earthquake |
Precast prestressed concrete (PCaPC) structure which is one of the damage-controlled structural systems was targeted in this research. Four multi-story PCaPC wall specimens whose experimental parameters were grouting for prestressing tendons and detail of boundary element were constructed and tested. Structural performance of multi-story prestressed concrete wall members were clarified based on discussions on obtained experimental data and prediction of structural behavior by using frame analysi |
DEPARTMENT OF ARCHITECTURAL ENGINEERING, KYOTO UNIVERSITY |
Abril 2016 |
Marzo 2019 |
MASANORI TANI |
Ingeniería y Tecnología |
Proyectos de investigación |
Developement of damage controlling reinforced concrete walls |
Resiliency of buildings has been becoming an important design issue in addition to safety. Rocking system using post-tensioned precast concrete walls is considered suitable to provide resiliency to buildings in seismic area. Reinforced concrete rocking wall system was tested to prove its enhanced performance in damage controlling ability. The numerical modelling scheme was developed to simulate damage of concrete and reinforcement in addition to load-displacement relations. The new structural sy |
TOKYO INSTITUTE OF TECHNOLOGY |
Abril 2016 |
Marzo 2019 |
SUSUMU KONO |
Ingeniería y Tecnología |
Proyectos de investigación |
Fondo Semilla UTEC - 2021: APLICACIONES DE MACHINE LEARNING PARA LA PREDICCIÓN DE LA RESPUESTA SÍSMICA DE ESTRUCTURAS DE CONCRETO REFORZADO |
El objetivo de este proyecto es establecer modelos de predicción basados en diferentes técnicas de Machine Learning para evaluar algunos de los parámetros importantes de la respuesta sísmica (e.g. capacidad de deriva, deformación residual, modo de falla, degradación de la resistencia, resistencia por corte, etc.) de estructuras de Concreto Reforzado. |
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Junio 2021 |
Marzo 2022 |
LUIS ALBERTO BEDRIÑANA MERA |
Ingeniería y Tecnología |
Proyectos de investigación |
Fondo Semilla UTEC - 2019: Evaluation of the Seismic Fragility and Seismic Risk of Water Supply Infrastructure Including Aftershock Effects |
Estudiar y analizar la ocurrencia de réplicas sísmicas en la costa peruana. |
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Junio 2019 |
Marzo 2020 |
LUIS ALBERTO BEDRIÑANA MERA |
Ingeniería y Tecnología |
Proyectos de investigación |
Fondo Semilla UTEC - 2022: Inspección y Evaluación Automática del Daño en Infraestructura Existente Empleando Deep-Learning |
|
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Julio 2022 |
Marzo 2023 |
LUIS ALBERTO BEDRIÑANA MERA |
|
Proyectos de investigación |
Fondo Semilla UTEC 2023 - Infraestructura de concreto durable y resiliente con materiales avanzados: barras de titanio y concreto de ultra alto desempeño para la construcción de puentes en zonas sísmicas |
|
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Agosto 2023 |
Julio 2024 |
LUIS ALBERTO BEDRIÑANA MERA |
Ingeniería y Tecnología |
Proyectos de investigación |
Ancestral engineering at the Tipon archaeological complex (Cuzco, Peru): Learning from materials, fluid mechanics, and ancient technologies |
|
MIT - MASSACHUSETTS INSTITUTE OF TECHNOLOGY |
Enero 2023 |
Mayo 2024 |
ADMIR MASIC |
Ingeniería y Tecnología |
Proyectos de investigación |
Smart Inspection for Bridges (SIBridge): Scalable Automatic Damage Inspection and Assessment of Reinforced Concrete Bridges via Unmanned Aerial Vehicles |
This project proposes an integration of drone path automation with state-of-the-art AI algorithms for the automatic evaluation and report of surface damages on RC bridges. The main objective of this research is to propose a scalable, low-cost, system for the inspection and assessment of superficial damage in RC bridges using UAVs. |
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Setiembre 2024 |
Setiembre 2025 |
LUIS ALBERTO BEDRIÑANA MERA |
Ingeniería y Tecnología |
Proyectos de investigación |
Caracterización multi-enfoque de concretos avanzados y sostenibles: Comportamiento a tracción de concretos con agregados reciclados, reforzados con fibras de acero y de polipropileno |
|
UNIVERSIDAD DE INGENIERIA Y TECNOLOGIA |
Agosto 2024 |
Agosto 2025 |
LUIS ALBERTO BEDRIÑANA MERA |
Ingeniería y Tecnología |